Sanyo HD150 Owners Manual - Page 7
Preparation
View all Sanyo HD150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET SPEAKERS INFRARED REMOTE RECEIVER POWER CORD CONNECTOR PROJECTION LENS LENS COVER MAIN ON / OFF SWITCH CAUTION Do not turn on a projector with lens cover attached. High temperature from light beam may damage lens cover and result in fire hazard. CARRYING HANDLE LEVEL AND TILT ADJUST HANDLE BACK OF CABINET EXHAUST VENT HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. G Do not put a flammable object near this vent. G Keep rear grills at least 3.3' (1m) away from any object, especially heat-sensitive object. G Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used. This projector detects internal temperature and automatically controls operating power of Cooling Fans. INFRARED REMOTE RECEIVER LAMP COVER BOTTOM OF CABINET AIR INTAKE VENTS This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction. G Do not cover vent slots. G Keep bottom clear of any objects. Obstructions may block cooling air. AIR FILTER ADJUSTABLE FEET ADJUSTABLE FEET 7