Sanyo PDG-DWL2500 RS232C Expand - Page 19
CF_SHARP Command, CF_GAMMA Command, CF_WBAL - Command
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PDG-DWL2500 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1"[CR] "000~015 Directly select Sharpness setting value %1 "UP Current Sharpness setting value + 1 "DN Current Sharpness setting value - 1 Details Set Sharpness value of user control The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.4.6 CF_GAMMA Command Command "CF_GAMMA_%1"[CR] %1 Details Response Set Gamma value of user control The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.4.7 CF_WBAL - Command Command "CF_WBAL-%1_%2"[CR] Red %1 Green Blue "000~063 Directly select Color value specified by White Balance%1 %2 "UP Current Color value set by White Balance%1 + 1 "DN Current Color value set by White Balance%1 - 1 Details Set Color value set by White Balance%1 of user control The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. (The value is held in Suspend mode.) This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 18/72