Sanyo PDG-DWL2500 RS232C Expand - Page 29

PDG-DWL2500 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1"[CR] "NORMAL Select Normal mode "FULL Select Full screen mode "WIDE Select Wide mode "ZOOM Select Zoom mode "TRUE Select True mode Input is "CUSTOM Select Custom mode Computer "DZOOM_UP Expand image size with Digital Zoom "DZOOM_DN Reduce image size with Digital Zoom "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key %1 "NORMAL Select Normal mode "FULL Select Full mode "WIDE Select Wide mode "ZOOM Select Zoom mode Input is "NATURAL Select Natural wide mode Video "CUSTOM Select Custom size "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Response Select image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and "DZOOM DN" start effecting from the first command. This command is available in normal Power ON status. Note) When Input is computer and AV sorts signals (480i / 575i...etc) are entered, the signal recognized as Video Input. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.7.2 CF_DZCENT Command Command "CF_DZCENT_%1"[CR] %1 "CENT" ---- Cancel Digital Zoom (CENT: "CENTER") Details Cancel Digital Zoom When image is expanded or shrunk, reset its value. This command is available in normal Power ON status and when Input is Computer. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 28/72