Sanyo PDG-DWL2500 RS232C Expand - Page 38
CF_3DSIDE2D Command, 10.9 CF_3DPHASE Command, 10.10 CF_ZOOM Command, 10.11 CF_BACKGND Command
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PDG-DWL2500 Expand Serial Command Functional Specifications %1 Details Response "1 Select 1 "2 Select 2 Setup 3D Sync. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.8 CF_3DSIDE2D Command Command "CF_3DSIDE2D _%1"[CR] %1 "ON Select ON "OFF Select OFF Details Setup 3D 2D. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.9 CF_3DPHASE Command Command "CF_3DPHASE _%1"[CR] %1 "000-031 Directly select 3D phase setting value Details Response Setup 3D phase setting value. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.10 CF_ZOOM Command Command "CF_ZOOM_%1"[CR] "RST Set Zoom store mode to Reset %1 "STR1 Set Zoom store mode to Store1 "STR2 Set Zoom store mode to Store2 Details Select Zoom store mode. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF. This command is available in normal Power ON status. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.11CF_BACKGND Command Command "CF_BACKGND_%1" [CR] "BLUE Select Blue Back "USER Select User %1 "BLACK Select Black Back "UP The same operation as pressing Up key or Left key "DN" ---------- Details Set Screen status for no signal.(Available only in the normal Power ON status) 37/72