Sanyo PDG-DWL2500 RS232C Expand - Page 23
CF_H - POS Command, CF_V - POS Command, CF_PCSTORE Command, CF_PCMODEFREE Command
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
PDG-DWL2500 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] "0000~nnnn" --- Directly select Horizontal Position setting value %1 "nnnn" shows maximum value, it is current Total Dots value - Display Dots value "UP Current Horizontal Position setting value + 1 "DN Current Horizontal Position setting value - 1 Details Set Horizontal Position value of PC signal. The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.5.5 CF_V - POS Command Command "CF_V-POS_%1"[CR] "0000~nnnn" --- Directly select Vertical Position setting value %1 "nnnn" shows maximum value, it is current Total Line value - Display Line value "UP Current Vertical Position setting value + 1 "DN Current Vertical Position setting value - 1 Details Set Vertical Position value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- When Input source is Video system 8.5.6 CF_PCSTORE Command Command "CF_PCSTORE_%1"[CR] "MODE1" ------ Store current PC Adjust status to Mode1 "MODE2" ------ Store current PC Adjust status to Mode2 "MODE3" ------ Store current PC Adjust status to Mode3 "MODE4" ------ Store current PC Adjust status to Mode4 %1 "MODE5" ------ Store current PC Adjust status to Mode5 "MODE6" ------ Store current PC Adjust status to Mode6 "MODE7" ------ Store current PC Adjust status to Mode7 "MODE8" ------ Store current PC Adjust status to Mode8 "MODE9" ------ Store current PC Adjust status to Mode9 "MODE10" ---- Store current PC Adjust status to Mode10 Details Store current PC Adjust status (each parameter status such as Total dots) to Mode1~Mode10. This command operates the same as storing to Mode1-Mode10 in PC Adjust MENU. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.5.7 CF_PCMODEFREE Command Command "CF_PCMODEFREE_%1"[CR] "MODE1" ------ Set Mode1 to Free status "MODE2" ------ Set Mode2 to Free status "MODE3" ------ Set Mode3 to Free status %1 "MODE4" ------ Set Mode4 to Free status "MODE5" ------ Set Mode5 to Free status "MODE6" ------ Set Mode6 to Free status "MODE7" ------ Set Mode7 to Free status 22/72