Sanyo PLC-HP7000L RS232C Basic - Page 12

POWER ON Command, 6 POWER OFF Command, 7 POWER OFF Command, 8 INPUT 1 Command, 9 INPUT 2 Command

Get Sanyo PLC-HP7000L PDF manuals and user guides View all Sanyo PLC-HP7000L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

PLC-HP7000L Basic Serial Command Functional Specifications 6.5 POWER ON Command Command "C00" [CR] Detail Power ON When already Power is ON, no operation is started. When sending this command during Countdown in process, Countdown is terminated. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.6 POWER OFF Command (Quick POWER OFF) Command "C01" [CR] Detail Power OFF (Standby) This command executes Quick Power OFF operation without displaying "Power OFF?" message, which is displayed when Power is turned OFF with ON/STAND-BY button of the projector or remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.7 POWER OFF Command Command "C02" [CR] Detail Power OFF (Standby) This command works the same way as when Power is OFF with ON/STAND-BY button of the projector and remote control. (When the command is sent once, "Power OFF?" message is displayed. If this command is sent again while "Power OFF?" message is displayed, Power OFF operation is executed.) When sending this command during Countdown in process, Countdown is terminated. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.8 INPUT 1 Command Command "C05" [CR] Detail Select Input 1. This command works differently from the command by "Input 1" key of the remote control. When Input 1 has been already selected, this command does not execute the source switching; just for switching to Input 1. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.9 INPUT 2 Command Command "C06" [CR] Detail Select Input 2. This command works differently from the command by "Input 2" key of the remote control. When Input 2 has been selected, this command does not execute the source switching; just for switching to Input 2. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 12/27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
PLC-HP7000L Basic Serial Command Functional Specifications
12/27
6.5 POWER ON Command
Command
“C00” [CR]
Detail
Power ON
When already Power is ON, no operation is started.
When sending this
command during Countdown in process, Countdown is terminated.
Acceptable
[ACK] [CR]
Response
Unacceptable
“?” [CR]
6.6 POWER OFF Command
(Quick POWER OFF)
Command
“C01” [CR]
Detail
Power OFF (Standby)
This command executes Quick Power OFF operation without displaying “Power
OFF?” message, which
is displayed when
Power is
turned
OFF with
ON/STAND-BY button of the projector or remote control.
Acceptable
[ACK] [CR]
Response
Unacceptable
“?” [CR]
6.7 POWER OFF Command
Command
“C02” [CR]
Detail
Power OFF (Standby)
This command works the same way as when Power is OFF with ON/STAND-BY
button of the projector and remote control.
(When the
command is sent once,
“Power OFF?” message is displayed. If this
command is sent again while “Power OFF?” message is displayed,
Power OFF
operation is executed.)
When sending this command during Countdown in process, Countdown is
terminated.
Acceptable
[ACK] [CR]
Response
Unacceptable
“?” [CR]
6.8 INPUT 1 Command
Command
“C05” [CR]
Detail
Select Input 1.
This command works differently from the command by “Input 1”
key of the remote control.
When Input 1 has been already selected, this
command does not execute the source switching; just for switching to Input 1.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
[ACK] [CR]
Response
Unacceptable
“?” [CR]
6.9 INPUT 2 Command
Command
“C06” [CR]
Detail
Select Input 2.
This command works differently from the command by “Input 2”
key of the remote control. When Input 2 has been selected, this command does
not execute the source switching; just for switching to Input 2.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
[ACK] [CR]
Response
Unacceptable
“?” [CR]