Sanyo PLC-HP7000L RS232C Basic - Page 13
INPUT 3 Command, 11 NETWORK Command, 12 VIDEO MUTE ON Command, VIDEO MUTE OFF Command, SCREEN
View all Sanyo PLC-HP7000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PLC-HP7000L Basic Serial Command Functional Specifications 6.10 INPUT 3 Command Command "C07" [CR] Detail Select Input 3. This command works differently from the command by "Input 3" key of the remote control. When Input 3 has been selected, this command does not execute the source switching; just for switching to Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.11 NETWORK Command Command "C08" [CR] Detail Select Network Input. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.12 VIDEO MUTE ON Command Command "C0D" [CR] Detail Video Mute ON This command works the same way as "SHUTTER" button of the remote control for Shutter Close, but does not work for Shutter Open. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.13 VIDEO MUTE OFF Command Command "C0E" [CR] Detail Video Mute OFF This command works the same way as "SHUTTER" button of remote control for Shutter Open, but does not work for Shutter Close. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.14 SCREEN NORMAL SIZE Command Command "C0F" [CR] Detail Set screen size to Normal (4:3) Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.15 SCREEN FULL SIZE Command Command "C10" [CR] Detail Set screen size to Full. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 13/27