Sanyo PLC-HP7000L RS232C Basic - Page 21

PLC-HP7000L Basic Serial Command Functional Specifications 6.58 PRESENTATION TIMER (Exit) Command Command "C8B" [CR] Detail Exit P-Timer function. This command works the same way as pressing and hold "P-TIMER" button of the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.59 KEYSTONE ↑ Command Command "C8E" [CR] Detail Correct keystone distortion by reducing upper part of image. This command invokes both operations of keystone distortion correction and OSD display, regardless of whether the "KEYSTONE" OSD has been already displayed or not. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.60 KEYSTONE ↓ Command Command "C8F" [CR] Detail Correct keystone distortion by reducing lower part of image. This command invokes both operations of keystone distortion correction and OSD display, regardless of whether the "KEYSTONE" OSD has been already displayed or not. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.61 KEYSTONE → Command Command "C90" [CR] Detail Correct keystone distortion by reducing right side of image. This command invokes both operations of keystone distortion correction and OSD display, regardless of whether the "KEYSTONE" OSD has been already displayed or not. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.62 KEYSTONE ← Command Command "C91" [CR] Detail Correct keystone distortion by reducing left side of image. This command invokes both operations of keystone distortion correction and OSD display, regardless of whether the "KEYSTONE" OSD has been already displayed or not. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 21/27