Sanyo PLC-HP7000L RS232C Basic - Page 27
Temp Read Command, 9 Lamp Mode Read Command
View all Sanyo PLC-HP7000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
PLC-HP7000L Basic Serial Command Functional Specifications 7.8 Temp Read Command Command "CR6" [CR] Detail Get the information of temperature inside a projector. With several built-in temperature sensors, it can get all the temperatures at once. Acceptable "%1 _ %2 _ %3" [CR] %1 = Temp. of sensor 1 %2 = Temp. of sensor 2 %3 = Temp. of sensor 3 Temperature data basic format is "_00.0". ("_" indicates a space) When the temperature goes under 0, it starts with "-" instead of a %1 space like "-05.5" [CR]. Response %2 When no temperature data returns due to hardware problems, it %3 starts with "E" like"E00.0" [CR]. With several built-in temperature sensors, the projector returns the values in succession. "_31.5_ _35.2_ 33.4 " [CR] The first sensor's data is followed by one space and afterwards the second sensor's data. Unacceptable "?" [CR] 7.9 Lamp Mode Read Command Command "CR7" [CR] Detail Get lamp mode. In the projector with single lamp, get ON/OFF status of the lamp Acceptable "%1" [CR] Response %1 "00" [CR] = Lamp is ON. "01" [CR] = Lamp is OFF. Unacceptable "?" [CR] 27/27