Sanyo PLC-XP200L Instruction Manual, PLC-XP200L - Page 32

Basic Operation Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 39 for details. SCREEN button Press the SCREEN button on the remote control to select the desired screen size. The selected screen size symbol appears on the screen for 4 seconds. See pages 43 to 44 and 47 to 48 for details. Press and hold the SCREEN button for more than 5 seconds to return all the screen size adjustment setting to the factory default setting. SHUTTER button See page 30 for details. D.ZOOM button Press the D.ZOOM button on the remote control to enter to the Digital zoom +/- mode. See page 44 for details. LENS SHIFT button See page 30 for details. ZOOM buttons Press the ZOOM buttons on the remote control to zoom in and out the image. FOCUS buttons Press the FOCUS buttons on the remote control to adjust focus of the image. INFO. button Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFO. button on the remote control to display the information window on the screen. To hide the information window, press the INFO. button again or Point 7 8 buttons. The information window can also be selected from the menu. ✔Note: • The H- and V-sync freq. values described in the figure may be different from the actual values. • SERIAL NO. is used to service the projector. 32 Remote Control AUTO PC button SCREEN button D.ZOOM button INFO. button SHUTTER button POINT ed7 8 buttons ZOOM buttons LENS SHIFT button FOCUS buttons ✔Note: • See the next page for the description of other buttons. Information Menu Information Menu