Sanyo PLC-XP200L Instruction Manual, PLC-XP200L - Page 76
Indicators, Appendix, The projector is detecting abnormal condition°
UPC - 086483072208
View all Sanyo PLC-XP200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Appendix The projector is detecting abnormal condition. POWER green Indicators LAMP/ WARNING WARNING LAMP SHUTTER TEMP. FILTER REPLACE red/blue red orange orange Projector Condition The temperature inside the projector is elevated close to the ❖ ✽ ✽ abnormally high level. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled ❖ ✽ ✽ down enough and the temperature returns to normal, the POWER indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.) Check and replace the filter. The projector has been cooled down enough and the ❖ ✽ ✽ temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter. The lamp cannot light up. (The projector is preparing for stand- ❖ ✽ by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.) The lamp cannot light up. (The lamp has been cooled down ❖ ✽ enough and the projector is in stand-by mode and ready to be turned on with the ON/STAND-BY button.) ✽ ✽ ✽ ✽ The lamp has been used overtime. Replace the lamp immediately and then reset the lamp counter. The indicator will be turned off after resetting the counter. WARNING FILTER When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.63). LAMP REPLACE When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp (p.65). 76