Sanyo PLC-XP200L Instruction Manual, PLC-XP200L - Page 75
Indicators and Projector Condition
UPC - 086483072208
View all Sanyo PLC-XP200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. Indicators POWER LAMP/ WARNING WARNING LAMP SHUTTER TEMP. FILTER REPLACE green red/blue red orange orange Projector Condition The projector is off. (The AC power cord is unplugged.) ❖ ✽ ✽ The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector. ❖ ✽ ✽ The projector is operating normally. (The shutter is open) The projector is operating normally. ❊ ✽ ✽ (The shutter is closed) The projector is preparing for stand-by or the projection lamp ❖ ✽ ✽ is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator lights green. ❖ ✽ ✽ The projection lamp is being cooled down in the Power management mode. ❖ ✽ ✽ The projector is in the Power management mode. ❊ ✽ ✽ The projection lamp is being cooled down in the Shutter management mode. ❊ ✽ ✽ The projector is in the Shutter management mode. Press the ON/STAND-BY button to turn on the projector. ✽ ✽ Fig.1 Filter replacement icon and "Please wait..." The filter is scrolled using the FILTER button on the remote control or the Filter control function in the setting menu. When the filter is being scrolled, the Filter replacement icon and "Please wait..." message (Fig. 1) appear on the screen for about 30 seconds. • • • on on (red on (blue) • • • dim dim (red) • • • b linking at the normal rate (approx. 1 second ON, 1 second OFF) b linking at the normal rate (blue and dim red) (approx. 1 second ON, 1 second OFF) • • • off Differ according to conditions. • • •blinking fast (approx. 0.5 seconds ON, 0.5 seconds OFF) blinking fast (blue and dim red) (approx. 0.5 seconds ON, 0.5 seconds OFF) • • • b linking slow (approx. 2 seconds ON, 2 seconds OFF) 75