Sanyo PLC-XP200L Instruction Manual, PLC-XP200L - Page 77
The projector is detecting abnormal condition°, Fig°2
UPC - 086483072208
View all Sanyo PLC-XP200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Appendix The projector is detecting abnormal condition. POWER green Indicators LAMP/ WARNING WARNING LAMP SHUTTER TEMP. FILTER REPLACE red/blue red orange orange Projector Condition ✽ ✽ Fig.2 Filter replacement icon Fig.3 Fig.4 Filter cartridge replacement icon ❖ If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3 appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon as possible. If the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig.4) appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon as possible. ✔Note: • Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function is set to "Off" (p.52) or during "Freeze" (p.33). The filter cartridge is not installed in the projector. Check the filter compartment to see if the filter cartridge is installed in the projector. When the filter cartridge is installed and the indicators continue to light and blink, read the column below. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ❊ ✽ ✽ ✽ The shutter is out of control. ❊ ✽ ✽ The shutter is out of control. (The projector is in the cooling mode.) ❊ ✽ ✽ The shutter is out of control. (The projector is in the stand-by mode.) In that case, contact the service station immediately. 77