Sanyo mpr-214f Instruction Manual - Page 17
Alarm temperature setting
View all Sanyo mpr-214f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
OPERATING INSTRUCTIONS Alarm temperature setting The high temperature and low temperature at which the alarm will be activated are effective for freezer and refrigerator. The following shows the outline of the alarm temperature setting. Display F01 F02 F03 F04 Mode High temp. alarm setting Low temp. alarm setting High temp. alarm setting Low temp. alarm setting Application Refrigerator Freezer Settable range +2 to +14oC -2 to -14oC +5 to +15oC -5 to -15oC Table 4 shows the basic operation for high temperature alarm setting and table 5 shows low temperature alarm setting for refrigerator. Perform key operation in the sequence indicated in the table. The example in the table is based on the assumption that the high temperature alarm is activated when the chamber temperature deviates from set temperature by more than +3oC and low temperature alarm is activated when the chamber temperature deviates from set temperature by more than -3oC. Note: The temperature alarm setting at the factory is as follows: Refrigerator Freezer High temp. alarm Set temp. +5oC Set temp. +10oC Low temp. alarm Set temp. -5oC Set temp. -10oC Table 4 Operation Key operated Indication after operation 1 ----- The current refrigerator temperature is displayed. 2 Press and hold the numerical value shift key for about 5 seconds. The first digit of the temperature display blinks. 3 Set the first digit to 1 with the numerical value shift key. (Note 1) The first digit of the temperature display blinks. 4 Press the set key. 5 Set to 003 by using digit shift key and numerical value shift key. The current set value is displayed SET and the first digit of the temperature display flashes. Pressing the key leads the change of flashed digit. Pressing the key shifts up the figure of the current digit. 6 Press the set key. The value is stored in memory and SET the current refrigerator temperature is displayed. Note 1: For the freezer, set the first digit to 3 (F03). 16