Sanyo mpr-214f Instruction Manual - Page 22

MAINTENANCE WARNING Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in order to prevent electric shock or injury. Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful to your health. Cleaning • Clean the unit once a month. Regular cleaning keeps the unit looking new. • Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories. If some of them are dirty, use a cloth containing diluted neutral dishwashing detergent (Undiluted detergent may break the plastic parts. For the dilution, follow the instruction enclosed with the detergent). When a diluted neutral dishwashing detergent is used, wipe the cabinet or accessories thoroughly with a cloth soaked in clean water. Then wipe the cabinet or accessories unit with a dry cloth to eliminate the moisture. • Never pour water onto or into the unit. Doing so can damage the electrical insulation and may cause electric shock or short circuit. • The compressor and other mechanical part are completely sealed. This unit requires absolutely no lubrication. Replacement of lamp Follow the procedure below at the time of replacement of the lamp. The lamp is located at the upper front side of refrigerator chamber. (Fig. 1) 1. Disconnect the power supply plug. 2. To remove the lamp cover, hold the both sides of the cover with flexure and push it toward. (Fig. 2) 3. Remove the bulb from the socket by turning it to counterclockwise. (Fig. 3) Caution: Take care not to injure the fingers as the bulb can be hot! < Bulb for replacement > Incandescent lamp (T22E17) 125V, 10W (for 110V, 115V) 250V, 15W (for 220V, 230V, 240V) 4. Mount a new bulb and replace the lamp cover. Lamp (inside) Fig. 1 Lamp cover Fig. 2 Bulb Fig. 3 21