Seagate ST32430N Product Manual - Page 30

Product Manual - Hawk 2LP Family SCSI-2 Volume 1, Rev. A, Effective altitude sea level reference,

Get Seagate ST32430N - Hawk 2.1 GB Hard Drive PDF manuals and user guides View all Seagate ST32430N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

22 Product Manual - Hawk 2LP Family SCSI-2 (Volume 1), Rev. A 7.4.3 Effective altitude (sea level reference) a. Operating -1000 to +10,000 feet (-305 to +3048 metres) b. Non-Operating -1000 to +40,000 feet (-305 to +12,210 metres) 7.4.4 Shock and vibration Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonance's may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement. The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 7.4.4-1. Orientation of the side nearest the LED may be up or down. 7.4.4.1 Shock a. Operating The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding 10 g's at a maximum duration of 11 ms (half sinewave). Shock may be applied in the X, Y, or Z axis. b. Nonoperating The limits of nonoperating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive subjected to nonrepetitive shock not exceeding 75 g's at a maximum duration of 11 ms (half sinewave) shall not exhibit device damage or performance degradation. Shock may be applied in the X, Y, or Z axis. c. Packaged The drive as packaged in a single or multiple drive pack of gross weight 20 pounds (8.95 kg) or less by Seagate for general freight shipment shall withstand drop test from heights listed below against a concrete floor or equivalent. For additional details refer to specifications 30190-001 (under 100 lbs) or 30191-001 (over 100 lbs). Package Size Drop Height 600 - 1800 in3 (9,832 - 29,502 cm3) 48 in (121 cm) >1800 in3 (>29,502 cm3) 42 in (106 cm)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
22
Product Manual - Hawk 2LP Family SCSI-2 (Volume 1), Rev. A
__________________________________________________________________________________________
7.4.3
Effective altitude (sea level reference)
a.
Operating
-1000 to +10,000 feet (-305 to +3048 metres)
b.
Non-Operating
-1000 to +40,000 feet (-305 to +12,210 metres)
7.4.4
Shock and vibration
Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive
is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonance’s may occur
internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent,
it may be necessary to modify the enclosure to minimize drive movement.
The limits of shock and vibration defined within this document are specified with the drive mounted by any of
the four methods shown in Figure 7.4.4-1. Orientation of the side nearest the LED may be up or down.
7.4.4.1
Shock
a.
Operating
The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock
not exceeding 10 g’s at a maximum duration of 11 ms (half sinewave). Shock may be applied in the X, Y,
or Z axis.
b.
Nonoperating
The limits of nonoperating shock shall apply to all conditions of handling and transportation. This includes
both isolated drives and integrated drives.
The drive subjected to nonrepetitive shock not exceeding 75 g’s at a maximum duration of 11 ms (half
sinewave) shall not exhibit device damage or performance degradation. Shock may be applied in the X,
Y, or Z axis.
c.
Packaged
The drive as packaged in a single or multiple drive pack of gross weight 20 pounds (8.95 kg) or less by
Seagate for general freight shipment shall withstand drop test from heights listed below against a concrete
floor or equivalent. For additional details refer to specifications 30190-001 (under 100 lbs) or 30191-001
(over 100 lbs).
Package Size
Drop Height
600 - 1800 in
3
(9,832 - 29,502 cm
3
)
48 in (121 cm)
>1800 in
3
(>29,502 cm
3
)
42 in (106 cm)