Seagate ST32430N Product Manual - Page 32
Product Manual - Hawk 2LP Family SCSI-2 Volume 1, Rev. C, 4.4.2, Vibration, Air cleanliness,
View all Seagate ST32430N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
24 Product Manual - Hawk 2LP Family SCSI-2 (Volume 1), Rev. C 7.4.4.2 Vibration a. Operating The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding 5-22 Hz @ 0.020 inches (0.51 mm) displacement 22-400 Hz @ 0.5 g Vibration may be applied in the X, Y, or Z axis. b. Nonoperating The limits of nonoperating vibration shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding 5-22 Hz @ 0.081 inches (2.05 mm) displacement 22-400 Hz @ 2.00 g Vibration may be applied in the X, Y, or Z axis. 7.4.5 Air cleanliness The drive is designed to operate in a typical office environment with minimal environmental control. 7.5 Electromagnetic compatibility 7.5.1 Electromagnetic susceptibility As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the responsibility of the system integrator to perform those tests required to ensure that equipment operating in the same system as the drive does not adversely affect the performance of the drive. See section 6.1.2, and see Table 7.2-1, DC Power Requirements.