Seagate ST32430N Product Manual - Page 33
Product Manual - Hawk 2LP Family SCSI-2 Volume 1, Rev. A, Mechanical specifications
![]() |
View all Seagate ST32430N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Product Manual - Hawk 2LP Family SCSI-2 (Volume 1), Rev. A 25 7.6 Mechanical specifications The following nominal dimensions are exclusive of the decorative front panel accessory. However, dimensions of the front panel are shown in figure below. Refer to Figure 7.6-1 for detailed mounting configuration dimensions. See section 7.6.3, Drive mounting. Height: Width: Depth: Weight: 1.00 in 4.00 in 5.74 in 1.5 pounds 25.4 101.6 145.8 0.68 mm mm mm kilograms C [3] [4] G L [1] D F E A Notes: [1] Mounting holes three on each side, 6-32 UNC. Max screw length into side of drive 0.15 in. (3.81 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm). B J [2] Mounting holes four on bottom, 6-32 UNC. Max screw length into bottom of drive 0.20 in. (5.08 mm). Screw tightening torque 6.0 in-lb (.675 NM) max with minimum thread engagement of 0.12 in. (3.05 mm). [3] Power and interface connectors can extend past the "A" dimension by 0.040 in. (1.02 mm). [2] [4] Decorative front panel (optional). H K N [4] Inches Millimeters A 5.74 ± .010 145.80 ± .25 B 4.00 ± .010 101.60 ± .25 C 1.00 + .026 25.40 + .66 - .010 - .25 D 2.362 ± .010 60.00 ± .25 E .620 ± .010 15.75 ± .25 F 4.000 ± .010 101.60 ± .25 G .250 + .010 6.35 + .25 - .005 - .12 H 1.750 ± .010 44.45 ± .25 J 3.750 ± .010 95.25 ± .25 K 2.370 ± .010 60.20 ± .25 P L 1.00 ± .010 25.4 ± .25 M 4.000 ± .010 101.6 ± .25 N 0.19 ± .010 4.83 ± .25 M P 0.015 max 0.381 max Figure 7.6-1. Mounting configuration dimensions
![](/manual_guide/products/seagate-st32430n-product-manual-1dc0f8e/33.png)