Sennheiser Set 880 Instruction manual Set 880 - Page 34
Switching between stereo and mono operation
![]() |
View all Sennheiser Set 880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using additional functions Switching between stereo and mono operation With certain sound recordings, voice or audio signals are recorded on one channel only (right or left stereo channel). This can result in a loss of individually recorded voices or instruments, especially when you have changed the balance setting. In order to avoid this effect, you can switch between stereo and mono operation. This setting is saved on the transmitter, independent of the stethoset receiver you are using. Activating stereo operation E Simultaneously press the balance button R (right) and the Hearing profile button on the transmitter for 2 seconds. The LED segment 1 and the Battery LED as well as the LED segment 5 and the Hearing profile LED light up for 10 seconds. Stereo operation is activated. 2s STEREO Activating mono operation E Simultaneously press the balance button L (left) and the Hearing profile button on the transmitter for 2 seconds. The LED segments 2, 3 and 4 light up for 10 seconds. Mono operation is activated. 2s MONO 34 | Set 880
![](/manual_guide/products/sennheiser-set-880-instruction-manual-set-880-dbce8ff/34.png)