Sennheiser Set 880 Instruction manual Set 880 - Page 9
Overview of the, Overview of the acoustic signals/beeps
View all Sennheiser Set 880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Product overview Overview of the Transmitter status LED Transmitter status LED - lights up white lights up blue flashes blue and white The transmitter... ... is in standby mode. ... and the stethoset receiver are connected. The speech intelligibility function is deactivated (see page 30). ... and the stethoset receiver are connected. The speech intelligibility function is activated (see page 30). ... has detected an incompatible digital audio signal (see page 12). The LEDs on the transmitter indicate the current operating state. If you are not pressing any button on the stethoset receiver or the transmitter, the LEDs automatically dim after approx. 30 seconds to not disturb you. Overview of the acoustic signals/beeps Beeps... during operation, 2 beeps during operation, no audio transmission, 5 beeps when changing the volume when changing the balance setting Meaning The rechargeable battery is almost empty, recharge the rechargeable battery (see page 16). The receiver is outside the transmission range (see page 42). The maximum or minimum volume is reached (see page 25). The maximum or minimum balance setting is reached (see page 26). Set 880 | 9