Sennheiser TeamConnect Ceiling 2 Configuration of 802.1X for TeamConnect Ceili - Page 11

Configuration of 802.1X TeamConnect Ceiling 2 EAP-PEAPv0/MSCHAPv2 For the EAP-PEAP authentication method, network clients need a certificate authority list with trusted certificates. The TCC2 supports certificates as per X.509 standard. PFX or PKCS#12 is currently not supported and must be converted before using them with the TCC2. The client will later authenticate against the server with credentials. Welcome to the 802.1X configuration! Available commands: p - Prints the current 802.1X configuration. c - Step-by-step 802.1X configuration. r - Removes and deactivates the current 802.1X configuration. d - Set date and time. w - Change the current password. q - Quits this setup without changing the 802.1X configuration. Command: c Please choose the authentication method. Possible settings are: 1 - EAP-TLS 2 - EAP-PEAP (PEAPv0/EAP-MSCHAPv2) Method: 2 After choosing EAP-PEAP as the authentication method you will be asked for the following information: 1. Username / identity of the client 2. Password of the client 3. Client authority list (file) An example configuration might look like this. Please enter your username: johndoe Now upload a Certificate Authority (CA) list. After successful upload enter the filename here. Filename: ca.pem Verifying Certificate Authority (CA) list... issuer= /C=FR/ST=Radius/L=Somewhere/O=Example Inc./[email protected]/CN=Example Certificate Authority Certificate Authority (CA) list is valid! Please enter the password for username „johndoe" Password: Retype password: 802.1X successfully configured with „EAP-PEAP" for user johndoe. The new configuration will be activated after a reboot. AN 1258 v1.0 | 11/12