Sharp 37HV4U User Manual - Page 11
Setting the System - parts
UPC - 074000359598
View all Sharp 37HV4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Preparation Setting the System After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables. 1 Removing the terminal cover Display (rear view) Press the two hooks toward the center of the Display and remove the cover toward you. Press down the two upper hooks to remove the cover toward you. 2 Connecting the system cable and the AC cord to the Display DISPLAY INPUT1 DISPLAY INPUT2 AC cord (WHITE) Connect the plug into the terminal and secure it by tightening the thumb screws. System cable (GRAY) Connect the plug firmly until the hooks on both sides click. 3 Connecting the system cable and the AC cord to the AVC System System cable AVC System (rear view) (GRAY) (WHITE) AC cord CAUTION • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE 10 AC CORD CONNECTED.