Sharp 37HV4U User Manual - Page 16

Part names AVC System Headphone PC INPUT terminal (AUDIO) (When connecting headphones, the sound from the Front view PC INPUT terminal (ANALOG RGB) speakers is muted.) STANDBY/ON indicator CLEAR* MAIN POWER button INPUT 4 terminals (AUDIO L/R) INPUT 4 terminal (VIDEO) INPUT 4 terminal (S-VIDEO) How to open the door. * If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object. This will reset the System as shown below. • AV MODE resets to USER • TV channel returns to initial channel setting (Air:2ch, Cable:1 or 2ch) • Twin picture resets to normal • Audio setting initializes • SRS resets to off • Image position initializes NOTE • Pressing CLEAR will not work if the System is in standby mode (indicator lights red). • Pressing CLEAR will not delete channel preset or secret number. See page 61 for clearing the secret number when you know it. See page 83 for initializing to the factory preset values when you forget your secret number. Rear view DC OUTPUT terminal (Terminal for expanded functionality in the near future.) DISPLAY OUTPUT 2 terminal Antenna (A) input terminal Antenna (A) output terminal Antenna (B) input terminal DVI-DIGITAL INPUT terminal RS-232C terminal DISPLAY OUTPUT 1 terminal AC INPUT terminal INPUT 1 terminal (S-VIDEO) INPUT 1 COMPONENT video terminals (Y, PB, PR) INPUT 3 COMPONENT video terminals (Y, PB, PR) INPUT 1 terminal (VIDEO) INPUT 1 terminals (AUDIO L/R) INPUT 3 terminals (AUDIO L/R) INPUT 3 terminal (S-VIDEO) INPUT 3 terminal (VIDEO) INPUT 2 terminals (AUDIO L/R) INPUT 2 terminal (VIDEO) INPUT 2 terminal (S-VIDEO) MONITOR OUTPUT terminal (S-VIDEO) MONITOR OUTPUT terminal (VIDEO) MONITOR OUTPUT terminals (AUDIO L/R) 15