Sharp 37HV4U User Manual - Page 9
Preparation
![]() |
UPC - 074000359598
View all Sharp 37HV4U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Preparation Attaching the speakers The supplied speaker unit can be attached to or detached from the Display. It must be attached unless you use external amplifier/speakers. Before attaching (or detaching) speakers, unplug the AC cord from the AC outlet. Be sure to attach or detach the speakers with two or more people. Example: Attaching right speaker. 1 2 3 Speaker plug Hole Hole Insert the speaker plug into the terminal on the Display. • Make sure that the speaker plug is inserted completely. Bulge Bulge Take hold of the speaker and slowly slide it to the Display. • Make sure that the two bulges of the speaker align with the holes on the Display. Fasten the screws to secure the speaker in place. • Use a screwdriver. • Perform the same steps for attaching left speaker. CAUTION • The speaker terminals on the Display are only for the supplied speaker unit. Do not connect any third party plug to the terminal or speaker to the Display. • Do not handle or move the Display by the speakers. NOTE • Perform the same steps for both left and right speakers. • To detach the speakers, perform the above steps in reverse order. • You can connect your own amplifier/speakers to the Display. See page 56 for connecting external speakers. 8
![](/manual_guide/products/sharp-37hv4u-user-manual-da65f34/9.png)