Sharp 37HV4U User Manual - Page 55

Useful adjustment settings Input signal (for PC input mode) • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again. 640g400 640g480 1024g768 720g400 848g480 1280g768 NOTE • You can only select the "Input Signal" on the Setup menu when receiving one of the 6 input signals listed above. Noise clean Produces a clearer video image. MENU RETURN SOURCE POWER TV/SAT/DVD MENU SET/ ENTER FAVORITE CH DTV/DVD TOP MENU DTV/SAT GUIDE DTV/SAT INFO VCR REC A POWER B C INPUT VOL‫؁‬ RECEIVER D VOL‫؀‬ 1 Press MENU and the TV MENU screen displays. MENU RETURN SOURCE POWER TV/SAT/DVD MENU SET/ ENTER FAVORITE CH DTV/DVD TOP MENU DTV/SAT GUIDE DTV/SAT INFO VCR REC A POWER B C INPUT VOL‫؁‬ RECEIVER D VOL‫؀‬ 2 Press c/d to select "Option". 3 Press a/b to select "Noise Clean", and then press SET/ENTER. • Some items may be grayed out. They are not selectable. TV MENU Option Input Select [Auto] 1 Press MENU and the PC MENU screen displays. 2 Press c/d to select "Setup". 3 Press a/b to select "Input Signal" and then press SET/ENTER. PC MENU Noise Clean Audio Out Cool Climate [Low] [Fixed] [Off] 4 Press a/b to select the desired level, and then press SET/ENTER. TV MENU Option Noise Clean Setup Option Off Input Signal High Auto Sync. Low Fine Sync. Picture Flip [Standard] Language [English] NOTE • "Noise Clean" is not selectable when channel display 4 Press a/b to select the desired input signal shows an input resolution of 480P, 720P or 1080I. on the display. Example PC MENU Setup Input Signal 640 x 480 848 x 480 54