Sharp 37HV4U User Manual - Page 45

Using external equipment Watching broadcasts via a Digital TV tuner Connecting a Digital TV tuner You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment. AVC System (rear view) Component video cable (commercially available) When using component video cable, select "COMPONENT" for "Input Select" in the menu. S-video cable (commercially available) AV cable (commercially available) DVI cable (commercially available) When using DVI cable, select "DVI" for "Input Select" in the menu. Digital TV tuner TV POWER TV CBL VCR DVD /SAT /LD /DTV ANT-A/B INPUT AV FRONT MODE SURROUND MTS CC VIEW MODE TWIN PICTURE FREEZE SELECT SUB INPUT TWIN CH DISPLAY SLEEP EDIT/ LEARN TV MENU Option Input Select INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC For INPUT3 signal Auto COMPONENT AV-Y/C DVI Displaying broadcasts via a Digital TV tuner To watch a Digital TV tuner image, select "INPUT3" from the "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 50.) Then select "INPUT3" on "Input Select" in the "Option" menu to set the correct input signal type. (See page 50.) The setting is stored and can be selected on the "INPUT SOURCE" menu. NOTE • Each time INPUT is pressed, the input source toggles. • If the Digital TV tuner image does not come in clearly, you may need to change the input signal type setting on the "Input Select" menu. • Refer to your Digital TV tuner operation manual for the signal type. • DVI-DIGITAL INPUT cannot connect to a PC. Input resolution is compatible with 1080I, 720P, 480P and VGA (60Hz). • Use the PC INPUT terminals on the front of the AVC System when connecting a PC. (See page 46.) • When connecting to the DVI-DIGITAL INPUT terminal, be sure to use a commercially available DVI cable with ferrite core attached. 44