Sharp 37HV4U User Manual - Page 47

Using external equipment Viewing an image from a PC Connecting a PC Use the PC terminals to connect a PC. NOTE • The PC input terminals are DDC1/2B-compatible. • Refer to page 77 for a list of PC signals compatible with the System. AVC System (front view) RGB cable (commercially available) PC ø 3.5 mm stereo minijack cable (commercially available) Signal names for 15-pin mini D-sub connecter 543 21 10 9 8 7 6 15 14 13 12 11 Pin No. 1 2 3 4 5 Signal name R G B Not connected CSYNC Pin No. 6 7 8 9 0 Signal name GND (Ground) GND (Ground) GND (Ground) ‫ם‬5V GND (Ground) NOTE • Macintosh adaptor may be required for use for some Macintosh computers. Pin No. q w e r t Signal name Not connected SDA HD VD SCL TV POWER TV CBL VCR DVD /SAT /LD /DTV ANT-A/B INPUT AV FRONT MODE SURROUND MTS CC VIEW MODE TWIN PICTURE FREEZE SELECT SUB INPUT TWIN CH DISPLAY SLEEP EDIT/ LEARN INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC Displaying an image from a PC To view an image from a PC, select "PC" from the "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 50.) When connecting to a PC, the correct input signal type is automatically detected. If the PC image does not come in clearly, you may need to set the Auto Sync. adjustment on the "Auto Sync." in the "Setup" menu. (See page 49.) You only need to select the input source on the "INPUT SOURCE" menu. NOTE • Each time INPUT is pressed, the input source toggles. 46