Sharp AF-05CML Service Manual - Page 6
And secure the bottom of the closure assemblies
![]() |
View all Sharp AF-05CML manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
AF-05CML 5. Insert the closure assemblieson both sides into the rails of the jamb. Closure assembly (Left) Jamb (Left) Indoor side 8. Secure the top angle of the unit and the top of the closure assemblies to the sash with three of the provided screws. (L=1",25.4mm) And secure the bottom of the closure assemblies to the sill with two of theprovided screws. (L=1",25.4mm) Top angle Closure assembly (Left) Sill Indoor side 1/2 inches (13mm) Stool 6. Loosen screws on both sides of the cabinet, then hang the base pan angle on and secure the screws again. 9. Cut the window sash foam seal to the proper length and seal the opening between the top of the inside window sash and the outside window sash. 7. Secure the base pan angle to the sill by using the hole of the front side on the angle with one screw. (L=1",25.4mm) Window sash foam seal 6
![](/manual_guide/products/sharp-af05cml-service-manual-f601367/6.png)