Sharp AF-05CML Service Manual - Page 7

AF-05CML DISASSEMBLING PROCEDURE 1. Unscrew the 2 screws holding the front panel on each 5. Remove the control knob and control panel. side. 2. Remove the front panel by pulling the front panel at the lower corner toward you about one inch. Next lift up and pull it toward you. 6. Unscrew the 5 screws. 3 screws are holding the control box at the top and right side. 1 screw is holding the power supply cord. 1 screw each screw on the evaporator. 3. Unscrew the 9 screws holding the cabinet. 2 screws are on each side. 4 screws are on back side. 3 screws are on top side. 7. Take off the fan motor connector. 4. Remove the thermostat. 8. Cut the wire fixing band, slide the control box rightward and remove. SLIDE 7