Sharp AR-208 AR-208S AR-208D Operation Manual Suite - Page 126
Setting The Length Of Alarm Beeps
![]() |
UPC - 708562050784
View all Sharp AR-208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
SETTING THE LENGTH OF ALARM BEEPS You can select the length in seconds of the alarm beeps (emitted at the end of transmission and reception) following the procedure below. 1 Press the [MENU] key. 6 Press the [MENU] key. Press the [MENU] key to exit. 2 Press the [ ] key ( ) or [ ] key ( ) until "4:USER PROGRAM" appears, and then press the [ENTER] key. Selection "4:USER PROGRAM" 3 Press the [ ] key ( ) or [ ] key ( ) until "17:BEEP LENGTH" appears, and then press the [ENTER] key. Selection "17:BEEP LENGTH" 4 Press the [ ] key ( ) or [ ] key ( ) to set the alarm beeps to the desired length or to turn them off. The selections are as follows: 1:3SEC 2:1SEC 3:NO BEEP 5 Press the [ENTER] key. 18
![](/manual_guide/products/sharp-208d-ar208s-ar208d-operation-manual-suite-0f78fc8/126.png)
18
SETTING THE LENGTH OF ALARM BEEPS
You can select the length in seconds of the alarm beeps (emitted at the end of transmission and reception) following
the procedure below.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "17:BEEP LENGTH" appears,
and then press the [ENTER] key.
4
Press the [
] key (
) or [
] key (
)
to set the alarm beeps to the desired
length or to turn them off.
The selections are as
follows:
1:3SEC
2:1SEC
3:NO BEEP
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
"4:USER PROGRAM"
Selection
"17:BEEP LENGTH"
Selection