Sharp AR-208 AR-208S AR-208D Operation Manual Suite - Page 151
to select the communication speed., to select the international
UPC - 708562050784
View all Sharp AR-208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
INITIAL SETTINGS 9 Enter the name of the destination with the numeric keys. Enter the name of the location or party by pressing numeric keys as described in "HOW TO ENTER CHARACTERS" on page 20 (maximum of 20 characters). If you do not want to enter a name, skip this step. 10 Press the [ENTER] key. 11 Press the [ ] key ( ) or [ ] key ( ) to select a Chain Dial setting. If you wish to set the number as a Chain Dial number, select "1:SET". Otherwise, select "2:CANCEL". (See "CHAIN DIALING" (p.60)) If the number is not set as a chain dial number, the communication speed and international communication mode cannot be selected. Press the [ENTER] key and go to step 17. 12 Press the [ENTER] key. 13 Press the [ ] key ( ) or [ ] key ( ) to select the communication speed. The selections are as follows: 1:33600bps 2:14400bps 3:9600bps 4:4800bps Note For international dialing, if you find that line noise necessitates a slower transmission speed, set the appropriate transmission speed. If you are not sure if a slower speed is required, set the speed normally. 14 Press the [ENTER] key. 15 Press the [ ] key ( ) or [ ] key ( ) to select the international communication mode. The selections are as follows: 1:NO 2:MODE 1 3:MODE 2 4:MODE 3 Note Sometimes when faxing internationally, line noise can cause the transmission to stop momentarily. To reduce these delays, choose the appropriate international transmission mode. 2 16 Press the [ENTER] key. Return to Step 5 to store another number. 17 Press the [MENU] key. Press the [MENU] key to exit. If the number is a Rapid key number, you can write the name on the label above the appropriate Rapid key. Note You may need to add a pause between certain digits in the number to allow time for connection. For example, if you are on a PBX telephone system that requires an access number, such as "9", to be dialed to access an outside line, you will need to enter a pause between the access number and the fax number of the other party. Pauses are entered by pressing the [REDIAL/PAUSE] key (2 seconds per pause). If necessary, several pauses can be entered in a row. 43