Sharp AR-208 AR-208S AR-208D Operation Manual Suite - Page 78

TROUBLESHOOTING AND MAINTENANCE 6 Close the front cover and then the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up. 7 When closing the covers, be sure to close the front cover securely and Caution then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. Note Even after a new toner cartridge is installed, the start ( ) indicator may not light up, indicating copying cannot be restarted (toner is not sufficiently fed). In this case, open and close the side cover. The copier will feed toner again approximately 2 minutes and then copying can be restarted. SCAN HEAD LOCKING SWITCH The scan head locking switch is under the original table. If the switch is locked ( ), the machine will not operate. Unlock the switch ( ) as shown below. Grasp here and turn in the direction of the arrow. Lock A Unlock To lock the scan head locking switch, hold up the catch in illustration A and turn the center knob counter-clockwise 90 degrees until you hear a click. 76