Sharp AR-208 AR-208S AR-208D Operation Manual Suite - Page 142
Setting The Recall Interval
UPC - 708562050784
View all Sharp AR-208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
INITIAL SETTINGS SETTING THE RECALL INTERVAL The machine will automatically reattempt transmission when a transmission is not successful because the line is busy or a communication error occurs. This setting is used to select the interval between recall attempts. Note • If a transmission is still not successful after the set number of recall attempts is made, a report will print and the document will be cleared from memory. • If a communication error occurs because the memory becomes full during transmission, no recall attempts will be made. • Recall attempts for a direct transmission will only be made when the RSPF is used. Recall attempts will not be made when the document glass is used. • When the machine is waiting to make a recall attempt for a direct transmission, other operations such as storing a transmission or selecting a function cannot be performed. When the line is busy You can select the interval between recall attempts when the line is busy. An interval from 1 to 15 minutes can be selected. 1 Press the [MENU] key. 5 Press the [ENTER] key. 2 Press the [ ] key ( ) or [ ] key ( ) until "4:USER PROGRAM" appears, and then press the [ENTER] key. Selection "4:USER PROGRAM" 3 Press the [ ] key ( ) or [ ] key ( ) until "10:RECALL INT. BUSY" appears, and then press the [ENTER] key. Selection "10:RECALL INT. BUSY" 4 Press the numeric keys to select the recall interval. Enter the recall interval ("01" to "15"). 6 Press the [MENU] key. Press the [MENU] key to exit. 34