Sharp AR-208 AR-208S AR-208D Operation Manual Suite - Page 240
STORING SCANNING SETTINGS, Scan Mode settings
![]() |
UPC - 708562050784
View all Sharp AR-208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
BEFORE USING THE NETWORK SCANNER FUNCTION STORING SCANNING SETTINGS Sets of scan settings (color mode, resolution, file type, etc.) can be stored for use in various scanning applications. Each set of settings is called a "Scan Mode". When storing a destination, you can select one of the stored scanned modes. The settings of the selected scan mode will be used when you scan an image and send it to that destination (p.8 to 11). 1 Click "Network Scanning" in the menu frame of the Web page. 3 Select the desired scanning settings. Refer to the following table for information on each setting. 2 Click "Add" below the scan list. If you need to change the settings in a previously stored scan mode, select the scan mode and click "Edit". To delete a scan mode, select the scan mode and click "Delete". 1 4 When you have finished selecting the settings, click "Submit". The selected settings are stored. Scan Mode settings Item Description Name Enter a name for the scan mode (up to 32 characters). Color Mode Select Full Color, Grayscale, or Mono 2 gradation for the color mode. Resolution Select the resolution. Void Area Select "On" to not scan the 4 mm around the edges of the image and instead attach a white border. Light Source When "Mono 2 gradation" is selected for "Color Mode", select "Red", "Green", or "Blue" for the light source. File Type Select "JPG", "PDF", or "TIFF" for the file type of the scanned image. Compression Mode Select "None", "MH (G3)", or "MMR (G4)" for the compression mode of the scanned image. Pages Per File Select the number of pages per image file. Default Scan Mode If you wish to use this scan mode as the default scan mode when storing destinations, select the "Default Scan Mode" checkbox. The "Default Scan Mode" is also used for Scan to E-mail when the e-mail address is directly entered or selected from an LDAP server. Default setting - Full Color 75 dpi Off Green TIFF None ALL Not selected Note • For normal text originals, a sufficiently legible image is produced when the color mode is set to "Mono 2 gradation" and the resolution is 200 dpi or 300 dpi. The 600 dpi setting should only be used in cases where high-clarity image reproduction is required, such as a photograph or an illustration. Note that a high resolution setting will result in a larger file size, and transmission may not be successful if there is insufficient disk capacity in the server to which the image is sent (or if the administrator of the server has restricted the file size). If transmission is not successful, you can try such measures as reducing the number of scanned pages in the file or reducing the scan size setting for the original. • To open the scanned image without using the software program in the CD-ROM that accompanies the network expansion kit, the recipient must have a viewer program that can open the image format (file type) that was selected as explained above. • The factory default setting for the image format produces the smallest file (File Type: TIFF, Compression Mode: MMR (G4)). If the recipient cannot open the image, try sending the image in a different format. • If the number of scanned originals is not divisible by the number set in "Pages Per File", the last file will have less pages. • The scan settings stored in a scan mode cannot be edited or deleted if the scan mode has been selected for a destination. - 7 -
![](/manual_guide/products/sharp-208d-ar208s-ar208d-operation-manual-suite-0f78fc8/240.png)