Sharp AR-F14 AR-F14 Saddle-Stitch Finisher Operation Manual - Page 12

11 Raise the lever on the front edge of the staple box. If the leading staple is bent, be sure to cut it off. If a bent staple is used for stapling, a staple jam will result. 13 Push in the staple box. Push the staple box all the way in until you hear a "click". 12 Replace the front edge lever. 14 Push in the staple unit. 15 Close the front cover. 16 Push the saddle stitch finisher back onto the machine. Print a test job in staple sort mode to Caution verify that stapling takes place correctly. I Discarding punch waste (when a punch unit is installed) 1 Press the detach button and separate the saddle stitch finisher from the machine. 3 Replace the punch waste receptacle. Caution The saddle stitch finisher and the machine are connected at the rear. Exercise caution when pulling them apart. 2 Gently pull the punch waste receptacle forward and discard the punch waste. Empty the punch waste receptacle into a garbage bag or other container, taking care not to let punch waste scatter. 4 Push the saddle stitch finisher back onto the machine. 10