Sharp AR M162 AR-M162 AR-M207 Operation Manual Suite - Page 12

MAIN FEATURES High-speed laser copying • First-copy time*1 at 300 dpi*2 is only 7.2 seconds. • Copying speed is 20 (AR-M207) or 16 (AR-M162) copies per minute. This provides a big boost to workplace productivity. *1 Measured after the machine has warmed up following power-on, copying using the document glass (8-1/2" x 11" (A4) paper fed from machine tray 1). The first-copy time may vary depending on machine operating conditions and ambient conditions such as temperature and power voltage. *2 "dpi" ("dots per inch") is a unit that is used to measure resolution. Resolution indicates how much detail can be reproduced in a printed or scanned image. High-quality digital image • High-quality copying at 600 dpi is performed. • In addition to automatic exposure adjustment, two exposure modes can be selected: "TEXT" for text-only originals, and "PHOTO" for photographs. The exposure can be adjusted to five levels in each mode. • Photo mode allows clear copying of originals with delicate halftones such as monochrome photos and color photos. Enhanced copying features • The zoom function can be used to reduce or enlarge copies from 25% to 400% in increments of 1%. (When the SPF is used, the zoom copy ratio range is 50% to 200%.) • Up to 999 copies can be made of an original scanned just once. (This can be changed to a maximum of 99 copies in the key operator programs.) • The key operator programs allow functions to be selected and managed to meet your specific needs. For example, access to the machine can be controlled by enabling audit mode. • The optional dual function board can be installed to enable use of rotation copy and other convenient functions. AA Erase copy* AA Margin shift* 2 in 1 copy* 4 in 1 copy* CARD Front CARD CARD Rotation copy* XY zoom copying * When the dual function board is installed. Dual page copy Back Card shot* Sort function (when the dual function board is installed) Copies of multiple original pages can sorted into sets. 1 2 3 3 2 1 1 2 3 1 2 3 Laser printer function / color scanner function • The machine is equipped standard with a USB 1.1 port and a parallel port. A computer can be connected to these ports to use the machine as a printer or a scanner. • To use the machine as a printer or scanner, the printer driver or scanner driver must first be installed as explained in the "Software setup guide". • The scanning feature is only available when the computer is connected to the USB port and is running Windows 98/Me/2000/XP. If the computer is running Windows 95/NT 4.0 or is connected to the parallel port, only printing is available. 10