Sharp CD-CH1500 CDCH1500 Operation Manual - Page 19

Programmed Play Up to 32 tracks can be programmed. 1 While in the stop mode, press the MEMORY button to enter the programming save mode. 5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. 6 Press the s button. Advanced CD Playback - Programmed Play - 7 Press the 06 button to start playback. 2 Press one of the DISC 1 - DISC 6 buttons to select the desired disc. At this time, playback will not begin even if one of the DISC 1 - DISC 6 buttons is pressed. Selected disc number 3 Turn the jog dial to select the desired track. Selected track number Playback order 4 Press the MEMORY button to save the track number. Playback time To clear the programmed selections: Press the CLEAR button while the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode: While in the stop mode, press the CLEAR button. The "MEMORY" indicator will disappear and all the programmed content will be cleared. Adding tracks to the program: If a program has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track of the original program. To check which tracks are programmed: While the unit is stopped in the programmed play mode, press the 5 or 4 button. Notes: q Opening any tray of the programmed discs automatically cancels the programmed sequence. q Even if you press the POWER button to enter the stand-by mode or change the function from CD to another function, the programmed selections will not be cleared. q During program operation, random play is not possible. 19