Sharp CD-CH1500 CDCH1500 Operation Manual - Page 24

Recording from the Radio

Page 24 highlights

Recording - Recording from the Radio - Recording from the Radio 24 s Listening to the Radio (See page 20.) 1 Tune in to the desired station. (See page 20.) 2 Load a cassette into the compartment with side A facing you. 3 Press the REVERSE MODE button to choose one side or both sides. .... To record on both sides. .... To record on only one side. 4 Press the REC PAUSE I6 button repeatedly to switch to the side you record on. q Recording will be paused. q To record on both sides, begin on side A. (If recording is started from side B, the tape will not switch over to side A.) 5 Press the 06 button to record on side A, or the 1 button for side B. When you press the 06/1 0 button on the remote control, the system will record on the side specified in step 4. To interrupt recording: Press the REC PAUSE I6 button. To resume recording, press the same button (06 or 1) you pressed in step 5. To stop recording: Press the s button. Note: If you hear a whistling noise while recording an AM station, move the AM loop antenna. s Erasing recorded tapes 1. Press the TAPE button. 2. Follow steps 2 - 5 in "Recording from the Radio".

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

24
Recording
– Recording from the Radio –
Recording from the Radio
1
Tune in to the desired station. (See page 20.)
2
Load a cassette into the compartment with side A facing you.
3
Press the REVERSE MODE button to choose one side or both sides.
4
Press the REC PAUSE
I6
I6
I6
I6
I6
button repeatedly to switch to the
side you record on.
Recording will be paused.
To record on both sides, begin on side A. (If recording is started from side B,
the tape will not switch over to side A.)
5
Press the
06
06
06
06
06
button to record on side A, or the
1
button for
side B.
When you press the
06/1
0
button on the remote control, the system will
record on the side specified in step 4.
To interrupt recording:
Press the REC PAUSE
I6
button.
To resume recording, press the same button (
06
or
1
) you pressed in step 5.
To stop recording:
Press the
button.
Note:
If you hear a whistling noise while recording an AM station, move the AM loop antenna.
Erasing recorded tapes
1.
Press the TAPE button.
2.
Follow steps 2 - 5 in “Recording from the Radio”.
....
To record on both sides.
....
To record on only one side.
Listening to the Radio (See page 20.)