Sharp CD-CH1500 CDCH1500 Operation Manual - Page 27
Timer and Sleep Operation Continued
View all Sharp CD-CH1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Advanced Features - Timer and Sleep Operation - Timer and Sleep Operation (Continued) s Sleep operation 1 Play back the desired sound source. 2 Press the MENU button. 3 Turn the jog dial to select "SLEEP". Then press the ENTER button. s To use timer and sleep operation together Example: To fall asleep and wake to the same radio station You can play back the same source only (the function cannot be switched). 1 Set the desired playback or recording time (steps 1 - 8, pages 25 - 26). 2 While playing the desired source, set the sleep time (see left, steps 1 - 4). To change the sleep time: While the sleep time is displayed, turn the jog dial. (Maximum: 2 hours - Minimum: 30 minutes) 4 Press the ENTER button. 5 Your system will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. Note: Once the sleep time is set, it will remain unchanged until the setting is changed. To cancel the sleep operation: Press the POWER button while the sleep timer is set. To confirm the remaining sleep time: Perform the above steps 2 - 3. This time you can also change the sleep time. 1. Timer playback (recording) setting 2. Sleep timer setting An interval of 3 minutes or more is required. End time 30 minutes - 2 hours Desired time Sleep operation will automatically stop. Timer playback (recording) start time 27