Sharp CD-DD4500 CDDD4500 Operation Manual - Page 11

Connections (continued) CD-DD4500 Speaker connection Front speakers Main terminals: Connect the black wire to MAIN(-) terminal and the blue wire to the MAIN(+) terminal. Subwoofer terminals: Connect the black wire to the SUBWOOFER(-) terminal and the red wire to the SUBWOOFER(+) terminal. Right Left Red Red Black Black Blue Black Blue Black Surround speakers Connect each surround speaker wire to the SURROUND SPEAKER jack as shown. Use speakers with an impedance of 8 ohms or more, as lower impedance speakers can damage the unit. Right Left Red White SURROUND R SURROUND L FM/AM loop antenna connection Connect the FM/AM loop antenna to the ANTENNA jack. Preparation for Use - System Connections - Caution: Never mistake the MAIN and the SUBWOOFER terminals. The unit or the speakers may be damaged. Only the included speakers should be used with this product. , Do not use other speakers with this unit or use the supplied speak- ers with other units. Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit. Do not let the bare speaker wires touch each other. Do not stand or sit on the speakers. You may be injured. Do not mistake the conection of center and surround speakers. Incorrect Position the FM antenna wire and rotate the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, or attach it to a stand or a wall. Notes: Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception. Do not connect the attached FM antenna to an external FM antenna. Otherwise, trouble may occur. Installing the AM loop antenna: < Assembling > Center speaker Connect the center speaker wire to the CENTER SPEAKER jack as shown. Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit. Black < Attaching to the wall > CENTER Wall Screws (not supplied) Demonstration mode (See page 15.) 11