Sharp CD-DD4500 CDDD4500 Operation Manual - Page 32
Changing the Speaker, Setting Continued
![]() |
View all Sharp CD-DD4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Surround Operation - Changing the Speaker Setting - Changing the Speaker Setting (Continued) 1 Press the MENU button repeatedly to select "SP DELAY". 2 Within 8 seconds, press the ITEM button to select "CENT" or "SURR". Speaker delay setting The best sound will be achieved by placing the front speakers, center speaker and surround speakers at the same distance from the listener. When some of the speakers are at a different distance from the listener, you can select a speaker delay to make it seem as though the speaker distances are the same. (Factory-shipped settings: CENTER → 0 ms, SURROUND → 5 ms) If the settings need to be changed due to the type of sound source being played or the conditions in the room, change them as follows. CENT: To delay the sound from the center speaker SURR: To delay the sound from the surround speakers 3 Within 8 seconds, use the SET UP (W or X) button on the re- mote control to select a value. Adjustable range CENTER: 0 ms - 5 ms SURROUND: 0 ms - 15 ms (Can be changed in 1 ms steps.) Notes: As a guide for setting the correct delay time, 1 ms is equal to approximately 12" (30 cm) from where the selected speakers are placed further away from the listener than the typical location. If the delay time for the surround speakers is set to a large value, a large sound space will be created. If it is set to a small value, the sound space will be small and intimate. 32
![](/manual_guide/products/sharp-cddd4500-cddd4500-operation-manual-ba83886/32.png)