Sharp CD-DD4500 CDDD4500 Operation Manual - Page 24
Tape Playback
![]() |
View all Sharp CD-DD4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Listening to a Cassette Tape (TAPE 1 or TAPE 2) Before playback: For playback, use normal or low-noise tape for the best sound. (Metal or CrO2 tape is not recommended.) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Before loading a tape into the cassette compartment, tighten the slack with a pen or pencil. Playback is possible in TAPE 1 compartment as well as in TAPE 2. 1 Press the POWER button to turn the power on. 2 Open the cassette door by pushing the area marked "7 PUSH EJECT". Tape Playback - Listening to a Cassette Tape (TAPE 1 or TAPE 2) - 24 Sound Control (See page 16.) 3 Load the cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. TAPE 1 TAPE 2 4 Press the TAPE (1 V 2) button to select the cassette you want to listen to. 5 Press the 0/R ( 0 ) button to start playback. To stop playback: Press the s (TAPE s) button. Fast forward/rewind: (TAPE 2 only) 1. Press the s (TAPE s) button, then press the TAPE (1 V 2) button to select TAPE 2. 2. To advance the tape, press the W PRESET 2 4 ( 2) button. To rewind it, press the 5 3 PRESET X ( 3 ) button. Caution: To remove the cassette, press the s (TAPE s) button, and then open the compartment. Before changing from one tape operation to another, press the s (TAPE s) button. If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open. Wait until the power is restored.
![](/manual_guide/products/sharp-cddd4500-cddd4500-operation-manual-ba83886/24.png)