Sharp CD-DD4500 CDDD4500 Operation Manual - Page 25
Recording from the Radio
View all Sharp CD-DD4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Recording from the Radio CD-DD4500 Before recording: q When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. q SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. q The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). q For recording, use only normal tapes. Do not use metal and CrO2 tapes. Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback only. 1 Tune in to the desired station (see page 22). 2 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 Press the REC PAUSE I6 (I6) button. Recording will be paused. 4 Press the 0/R ( 0 ) button to start recording. Tape Recording - Recording from the Radio - To interrupt recording: Press the REC PAUSE I6 (I6) button. To resume recording, press 0/R ( 0 ) button. To stop recording: Press the s (TAPE s) button. Note: If you hear a whistling noise while recording an AM station, move the AM loop antenna. Erase-prevention tab of cassette tapes: q When recording on a cassette tape, make sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. q To protect the recorded sound, remove the tab Tab for side B after recording. Cover the tab hole with adhesive tape to record on the tape without the tab. Side A Tab for side A Listening to the Radio (See page 22.) 25