Sharp CD-DD4500 CDDD4500 Operation Manual - Page 27
Dubbing from Tape to Tape
![]() |
View all Sharp CD-DD4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Dubbing from Tape to Tape CD-DD4500 You can record from TAPE 1 to TAPE 2. For recording, use only normal tapes. Do not use metal and CrO2 tapes. 1 Press the POWER button to turn the power on. 2 Load a prerecorded cassette into the TAPE 1 cassette compart- ment. Insert a blank tape into the TAPE 2 cassette compartment. It is recommended that the recording tape be the same length as the master tape. 3 Press the TAPE (1 V 2) button until "TAPE 1" appears in the display. 4 Press the REC PAUSE I6 (I6) button. Recording will be paused. 5 Press the 0 / R ( 0 ) button to start dubbing. To stop dubbing: Press the s (TAPE s) button. TAPE 1 and TAPE 2 will simultaneously stop. Erasing recorded tapes 1. Load the tape to be erased into the TAPE 2 cassette compartment. 2. Press the TAPE (1 V 2) button until "TAPE 2" appears in the display. 3. Press the REC PAUSE I6 (I6) button. ("ERASE" will appears.) 4. Press the 0 / R ( 0 ) button to start erasing. Note: Make sure that the TAPE 1 is not in use. 27 Tape Recording - Dubbing from Tape to Tape -
![](/manual_guide/products/sharp-cddd4500-cddd4500-operation-manual-ba83886/27.png)