Sharp DK-AP8P DK-AP8P Operation Manual - Page 14

DK-AP8P Listening to the iPod or iPhone (continued) ■ To insert iPod or iPhone adaptor 1. Open the docking station by sliding out the top cover at the area marked. ■ To remove iPod or iPhone adaptor Insert the tip of a screwdriver ("-" type, small) into the adaptor hole as shown and lift upward to remove. iPod and iPhone ON/STAND-BY ESOUND ON/STAND-BY ESOUND 2. Insert the iPod or iPhone adaptor into unit and connect your iPod or iPhone. iPhone (bottom) iPhone Dock connector iPhone adaptor ■ iPod or iPhone playback 1 Press the ON/STAND-BY button on the main unit or touch the ON/STAND-BY pad on the remote control to turn the power on. 2 Insert iPod or iPhone unit in the dock of main unit. 3 Press the button on the iPod unit or touch the / pad on the remote control to start playback. For iPod touch and iPhone, playback will start by touching the ENTER pad on the remote control. iPhone adaptor iPhone iPhone dock iPhone connector ■ iPhone playback ● Sound will only switch from iPhone to the main unit after authentication process is completed in approximately 10 seconds. Caution: ● Incoming calls will pause the playback and iPhone ringtones Unplug all accessories from the iPod or iPhone before inserting will be heard from the main unit speakers only. it into the dock. ● Once the calls are answered, the conversation can only be heard through the built-in iPhone speaker.Turn on the iPhone 14 speaker or undock the iPhone to start conversation.