Sharp DK-AP8P DK-AP8P Operation Manual - Page 6

DK-AP8P Precautions ■ General ● Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) General Information 4" (10 cm) ● Use the unit on a firm, level surface free from vibration. ● Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. ● Do not place anything on top of the unit. ● Do not expose the unit to moisture, to temperatures higher than 140˚F (60˚C) or to extremely low temperatures. ● If your system does not work properly, disconnect the AC/DC adaptor from the AC outlet. Plug the AC/DC adaptor back in, and then turn on your system. ● In case of an electrical storm, unplug the unit for safety. ● Hold the AC/DC adaptor by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. ● The AC/DC adaptor is used as a disconnect device and shall always remain readily operable. ● The supplied AC/DC adaptor contains no user serviceable parts. Never remove covers unless qualified to do. It contains dangerous voltages, always remove mains plug from the main outlet jack before any service operation or when not in use for a long period. ● The AC/DC adaptor supplied with the DK-AP8P must not be used with other equipment. ● Never use an AC/DC adaptor other than the one specified. Otherwise, problems or serious hazards may be created. ● Do not remove the outer cover, as this may result in electric shock. Refer ON/STAND-BY ESOUND internal service to your local SHARP service facility. ● This unit should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C). Warning: The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. ■ Volume control The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes. 6