Sharp DV-NC150U DV-NC150U Operation Manual - Page 7

Setup About the Video Cassettes and Discs Playable Video Cassettes Use only cassettes marked Playable Discs with this unit. Playable discs Mark (logo) Region code DVD-Video or * 1,2,4,6 Recorded signals Disc size Disc types DVD-R DVD-RW * 1,2,3,4,5,6 Digital video 12 cm or (MPEG2) 8cm Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 Setup DVD+R DVD+RW * 1,2,3,4,5,6 Audio CD * 4,6 CD-R CD-RW * 4,5,6 Digital audio Example Digital audio 12 cm or or MP3 8cm Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 MP3 Example Group 1 Track 1 Track 2 Track 3 Track 4 Group 2 Track 5 Track 6 If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers. *3: This label indicates playback compatibility with DVD- RW discs recorded in VR mode (Video Recording Format). This player cannot play the DVD-RW that supports CPRM (Contents Protection for Recordable Media). *4: Scratched or stained discs may not be played back. *5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs. *6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised. Unplayable Discs ¡On the following discs, only the sound can be heard (picture cannot be viewed). CDV, CD-G ¡NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM, CD-I, Photo CD, Video CD, DVD with region codes other than 1 or ALL, DVD-ROM for personal computers, CD-ROM for personal computers Hint ¡On the following disc, the sound MAY NOT be heard. • Only the sound recorded on the normal CD layer can be delivered. Super Audio CD The sound recorded on the high density Super Audio CD layer can- ¡Any other discs without compatibility indications. not be delivered. Connections Please refer to "Basic TV Connection" on the front page before you use this unit. RF Output Channel If channel 3 is already occupied for broadcasting, 1) Set your TV to channel 4. Hint 2) Insert a pre-recorded tape into this unit. • The RF output channel may 3) Press the OUTPUT button on the VCR/DVD so that the VCR OUTPUT light is lit. • If "VCR" light does not appear on the display of this unit, press the VCR/TV button on the remote control. 4) Press the PLAY button once. not change when you adjust tracking during playback. In this case, stop the playback, and start the playback again. 5) After a few seconds, press the PLAY button on the VCR/DVD for 3 seconds. After that, press the PLAY • The RF output channel will change to channel 4 from channel 3 and you will see a playback picture. button on the VCR/DVD for 3 In this case, "ch04" will appears on the front panel. seconds again. • When a picture does not appear on the TV screen, repeat step 4. 6) Press the STOP button to stop playback. -7- EN