Sharp DV-RW350U Operation Manual - Page 99
Cause, Error message, Solution
![]() |
View all Sharp DV-RW350U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Before you start Connections Getting started Recording Playing discs Others Troubleshooting (cont'd) Symptom The disc tray does not open when you press OPEN/CLOSE A button. D V "Repairing" appears on the display. D Repairing Picture noise appears. V C The tape does not play. R Recording does not start immediately after you press REC/OTR button. The remote control does not function. The motor rotates even when playback / recording is stopped. Remedy • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the unit is adding disc data to the disc. • If there is a power failure or unplugging during recording, finalizing, formatting or editing, a Repairing process will begin automatically just after turning the unit on again. It may take several minutes up to about four hours. • Head cleaning for VCR may be necessary. Refer to "AUTO HEAD CLEANING". • Adjust tracking control for better picture by pressing CHANNEL (o / p) buttons on this unit or CH ( o / p) buttons while you are playing a videotape. • No videotape is inserted. • Make sure the videotape has a record tab when you record to a videotape. If needed, cover the hole with cellophane tape. • Check if a videotape is in this unit. • The motor may rotate for the duration of approximately 5 minutes for efficient operation.This is not a malfunction. Error message Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Region Error --- Please eject the disc. --Playback is not authorized in your region. Parental Lock On --- Please eject the disc. --The current selected parental level Prohibits playback. Recording Error This program is not allowed to be recorded. Recording Error This program is not recordable in Video mode. Recording Error Can not record on this disc. Recording Error This program is not allowed to be recorded on this disc. Recording Error This disc is protected and not recordable. Recording Error Disc is full. (No area for new recording) Cause Unplayable disc is inserted in the unit. The disc is upside down. Playback is not authorized in the region of the DVD-Video disc which you inserted in the unit. Solution Insert the standardized disc which bear the marks on page 43. Insert the disc with the labeled side facing up. Insert the DVD-Video disc with region codes 1 or ALL. The current selected parental level in the SETUP Menu prohibits playback. Check the "Parental Lock" setting (pages 92-93). The recording function encountered You cannot record copy prohibited the copy prohibited program. programs. You are trying to record the copyonce program onto the DVD-RW disc in Video mode. You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. The disc is dirty. The disc is damaged. You are trying to record the copyonce program onto the DVD-RW disc which is not compatible with CPRM. You are trying to record on to the protected disc which is set in the Disc Setting Menu. Set "DVD-RW Recording Format" to "VR mode" (page 29). Insert the recordable disc, and ensure the disc status satisfies the recording requirements (pages 27-28). Clean the disc with a cleaning cloth. Replace the disc. Insert the DVD-RW disc (ver.1.1 compatible with CPRM). Release the disc protect setting in the Disc Setting menu (page 42). You are trying to record onto the disc which has no space for recording. Insert the recordable disc with enough recording space. Editing Changing the SETUP menu VCR functions Others Español 99
![](/manual_guide/products/sharp-dvrw350u-operation-manual-b490d31/99.png)