Sharp LL-191A-W Operation Manual - Page 24

Specifications Product specifications Model name LL-191A-W (White)/LL-191A-B (Black) LCD display 48 cm measured diagonally TFT LCD module Resolution (max.) SXGA 1280 x 1024 pixels Displayable colors (max.) Approx.16.19 million colors (6 bit + FRC) Brightness (max.) 220 cd/m2 Dot pitch 0.294 (H) x 0.294 (V) mm Contrast ratio 500:1 Angle of visibility Left-right 160°; up-down 160° (contrast ratio > 5) Screen display size Horizontal 376.3 mm x Vertical 301.1 mm Video signal Analog RGB (0.7 Vp-p) [75Ω] Sync signal Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL level: +/-) Expansion compensation Digital scaling (Enlarges VGA/SVGA/XGA etc. to full screen size.) Plug & Play VESA DDC2B compatible Power management VESA: based on DPMS Speaker output 1 W + 1 W Input signal terminal Mini D-sub15 pin (3 row) Audio input terminal Mini stereo jack Headphone terminal Mini stereo jack Screen tilt Upward approx. 0 - 25°; downward approx. 0 - 5° Power supply AC100 - 240 V, 50/60 Hz Temperature of operating environment 5 - 35°C Power consumption 33 W (with no audio input) (36 W maximum, 1.8 W when in power-saving mode) Dimensions Approx. 419 (W) x 213 (D) x 409 (H) mm Weight Approx. 7.8 kg (approx. 5.7 kg excluding stand) (Excluding cables.) Dimensions (Units: mm) - Analog signal cable: approx. 1.8 m - Audio cable: approx. 1.8 m Note: - As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 24