Sharp LL-191A-W Operation Manual - Page 30
Instructions for attaching a VESA-compliant arm
![]() |
UPC - 074000046054
View all Sharp LL-191A-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Instructions for attaching a VESA-compliant arm The following stand or arm can be attached to the monitor. - Stand (sold separately) Model name: NL-S02-H (Ivory) NL-S02-B (Black) - VESA-compatible arm (commercially available) 5. Attach the arm to the monitor with the four screws. Compatible commercially available arms Attachments must satisfy the following. - Compatible with the VESA standard. - Have a gap of 100 mm x 100 mm between the screw holes on the section to be attached. - Not be likely to fall off or break off after being attached to the monitor. How to attach the arm or stand - Be careful not to over bend the cable or add extension cords as this could lead to malfunction. - While following these instructions, please also refer to the installation instructions in the operation manual included with the arm or stand. Note: - The screws used to attach the arm should be M4 screws with a length of 6 - 8 mm protruding from the surface to be attached. Using different screws could cause the monitor to fall off or to be internally damaged. CAUTION! - Be careful not to get your fingers pinched between the display and stand nor to let the stand drop. These could lead to injury. 1. Remove the cables. 2. Spread out a soft cloth on a suitable horizontal surface. 3. Being careful not to damage the monitor, gently lay the monitor on it display-side down. 4. Remove the four screws and then remove the stand from the monitor. Screw used to attach arm Arm Part of monitor to which arm is attached Notes: - The stand is specially made for use with this monitor. Once having removed the stand, never attempt to attach it to another device. - Once having removed the screws, store them together with the stand and if the stand is ever re-attached be sure to use the original screws. Using different screws could lead to a malfunction. 30
![](/manual_guide/products/sharp-ll191aw-operation-manual-fad5bb9/30.png)